Automotive Tips from Auto Pro Troy: A Broken or Damaged Timing Belt
April 3, 2018
The timing belt rotates the cam shafts which open and close the valves that allow air, fuel, and exhaust to flow through the engine as it powers your car when you drive around Troy.
An old timing belt can lose a “tooth” in the belt allowing it to slip. The engine could stop or misfire. Timing belt slips – or a broken timing belt – can be disastrous on some engines. In “interference” engines, open valves can get in the way of the piston when the timing belt breaks or slips. When that happens one or more valves can be bent requiring expensive engine repairs.
It is important for Troy drivers to replace their timing belts as recommended in their owner’s manual to avoid unnecessary breakdowns. Ask the team of professionals at Auto Pro Troy in Troy if it’s time for your timing belt to be replaced.
Auto Pro Troy
512 East Maple Rd.
Troy, Michigan 48083
248-270-3002
Need Service?
More articles from Auto Pro Troy Auto Repair

Gearing Up (Differential Fluid Service)
January 25, 2026
You may have never thought about it, but when you turn a corner, the wheels on one side of your vehicle turn at a different speed than the other side. What is this magic? The answer is something called the differential. A differential is a gear box placed between the drive wheels and needs lub... More

Why Maintaining Your Windshield Wipers and Washers Matters (Windshield Wiper and Washer Inspection)
January 18, 2026
What do mud, bird droppings and frost all have in common? When theyre covering your windshield, they can temporarily obscure your view of the road, leaving you driving blind. And when you cant see the road clearly ahead of you, it can be really scary. Thats one of the reasons its important to m... More

U and your U-Joints (Lubricate U-Joints)
January 11, 2026
If your vehicles power goes to the rear wheels, then you have something called U-joints in the drivetrain. U-joints are connectors that allow the rotating power from your vehicles engine to deliver its power through a driveshaft to make the rear wheels rotate. You need U-joints because the surfa... More
