Back to all

Automotive Tips from Auto Pro Troy: Brake Noise

July 7, 2019

Your brake pads are the important parts that rub against the rotor (or disc) to slow and stop your car when driving in Troy. They eventually wear down.

When your pads are worn too much, they won’t stop your vehicle as well. When the friction material is worn away, metal parts of the pad are exposed and you’ll hear a squeal or grinding sound.

That’s when Troy drivers should replace their brake pads at Auto Pro Troy. Not only will new pads restore your stopping power, but replacing them on time will prevent damage to the rotor.

If your brakes are making noise, ask your Auto Pro Troy service advisor to inspect your brakes. Addressing problems early will restore your safety and prevent expensive brake damage.

Auto Pro Troy
512 East Maple Rd.
Troy, Michigan 48083
248-270-3002

Need Service?

Request a Quote

More articles from Auto Pro Troy Auto Repair

Gearing Up (Differential Fluid Service)

January 25, 2026

You may have never thought about it, but when you turn a corner, the wheels on one side of your vehicle turn at a different speed than the other side. What is this magic? The answer is something called the differential. A differential is a gear box placed between the drive wheels and needs lub... More

Why Maintaining Your Windshield Wipers and Washers Matters (Windshield Wiper and Washer Inspection)

January 18, 2026

What do mud, bird droppings and frost all have in common? When theyre covering your windshield, they can temporarily obscure your view of the road, leaving you driving blind. And when you cant see the road clearly ahead of you, it can be really scary. Thats one of the reasons its important to m... More

U and your U-Joints (Lubricate U-Joints)

January 11, 2026

If your vehicles power goes to the rear wheels, then you have something called U-joints in the drivetrain. U-joints are connectors that allow the rotating power from your vehicles engine to deliver its power through a driveshaft to make the rear wheels rotate. You need U-joints because the surfa... More